玻璃鋼管又稱玻璃纖維/復合材料管道，以玻璃纖維為基材，采用環氧樹脂樹脂體系。達到產品的環向和縱向的強度。產品分為通用型和導電型。

A kind of marine GRE Pipe, known as fiberglass reinforced thermoset-ting resin pipe, is based on fiberglass and adopts epoxy resin system, which achieves the annular and longitudinal strength of the product. Our GRE Pipe are classified into general types and conductive types.

• 重量輕。產品密度為1.5～2.01g/cm3，綜合的重量為鋼的1/3。在部分系統的應用中達到了很好的減重效果。

• 耐腐蝕。廣泛的應用于船舶的壓載水系統、脫硫系統。常規設計壽命為30年。

• 安裝方便。產品根據設計的圖紙進行工廠內的預制粘接，可以到達90%的預制率，結合其重量輕的優勢，方便現場的安裝工作，可以節省大量的現場安裝的人工和時間。

• 產品設計壓力等級分為10bar/16bar/25bar。多個壓力等級滿足不同的使用系統。

• 產品溫度：高溫到達93攝氏度。同時擁有良好的低溫性能。

• Light weight. The product density is 1.5~2.01g/cm3, and the overall weight is 1/3 of steel. A good weight loss effect has been achieved in the application of some systems.

• preservative. It is widely used in ships' ballast water system and desulfurization system. The conventional design life is 30 years.

• Easy to install. The products are prefabricated and bonded in the factory according to the design drawings, which can reach a prefabrication rate of 90%. Combined with its light weight advantage, it is convenient for on-site installation work and can save a lot of labor and time for on-site installation.

• Working Pressure: 10bar/16bar/25bar.

• Product temperature: high temperature reaches 93 degrees Celsius. A the same time, it has good low temperature performance.